Contents and general instructions
XXIV
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
Marking version−related information
Text passages which contain special information on certain
operating system versions are usually marked as follows:
New feature:
Note that the the function marked is new as from the speci
fied operating system version (in the example 4.63) and is not
supported by the older operating system versions.
Compatibility violation:
Note that as from
the specified operating system version (in
the example 4.63), the function marked is not compatible
with the older versions. The explanations in the text must be
observed.
Overview of operating system versions
The following table provides an overview of the modifications
to the operating system (firmware) of the SPC200:
Version
Identification What has been changed? See section
up to 3.8 WinPISA version 4.1a is recommended for
this version.
Supported drives of the DGP family and
stepping motors of the MTR−VRDM family.
With regard to the system functionality, this
version is the reference for all new ver
sions.
New feature
as from OS 4.63
Compatibility
violation
as from OS 4.63
To Next Page
Loading...
