Festo SPC200 - Page 64

1. Installation and general user information
1−24
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
You can use context menus in many areas of WinPISA, al
though this function will not always explicitly be described.
Simply try out the function. Using the context menu for icons
in the project window is par ticularly effective.
General editing functions
The following editing functions are available in most Windows
programs for text and
often for other elements:
Cut In cutting, the selected area is removed and transferred to the
clipboard. The content which has been cut can then be in
serted in another position.
To cut an area:
1. Mark the desired area.
2. Select the [Cut] command from the [Edit] menu.
Copying When copying, you transfer the selected area to
a clipboard
without removing it. The content of the selected area can then
be inserted in another position.
To copy an area:
1. Mark the desired area.
2. Select the [Copy] command from the [Edit] menu.
Paste You can paste text from the clipboard.
1. Move the inser tion point to the position where the text is
to be
pasted. Or select the area which you wish to replace.
2. Select the [Paste] command from the [Edit] menu.
Delete You can delete and remove characters or areas from the
program text.
To delete a character or area:
1. Mark the area or the character which you wish to delete.
2. Select the [Delete] command from the [Edit]
menu.