Festo SPC200 - Page 65

1. Installation and general user information
1−25
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
The commands Cut", Copy", Insert" and Delete" are also
available for programs, axes and I/O modules in the project
window. When inserting these commands, you must select
the appropriate icon in the project window, as when inserting
a new element.
Search/Replace In order to find certain positions in a text, you can use this
command
to search for them. You can also replace specified
texts by other texts.
You search for a text as follows:
1. Select the command [Search] from the menu [Edit] and
enter the text.
2. Search for the text with OK".
Then search for the next text position with F3 (in the [Edit]
menu, command [Search again]).
With the command [Replace] you can also replace the text
specified by a different text. With Replace" the first text
position will be replaced; with Replace all" all the text
positions will be replaced.