FLIR BRICKSTREAM 3D Gen 2

To Next Page

To Previous Page

Brickstream® 3D Gen 2 Version 6.2

6/25/2021

Imaging Solutions Inc.

Brickstream® 3D Gen 2 Installation Guide

June 2021

n People are walking on either a flat or an evenly sloped surface. All 4 feet (120 cm) on each side of

the counting lines should have a maximum height variance of 12 inches (30 cm).

n There are additional caveats for outdoor deployments.

The following situations can impact performance:

Description Impact Automated Detection

Lighting level - too dark Disables counting Yes

Lighting level - too bright Disables counting Yes

Calibration failure Disables counting Yes

Shaking sensor Unpredictable No

Tall Moving Objects Over counting No

Uneven surface Under counting No

Heavy rain Under counting No

Dirty or scratched lens* Under counting No

Transparent or translucent objects Unpredictable No

Noisy data Unpredictable Yes

*Depending on the severity, this may appear as a calibration failure and be automatically detected.

FLIR BRICKSTREAM 3D Gen 2 - Page 11