Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
69
7. From the Delivery Schedule list choose how frequently to deliver the aggregated data sets
(Immediate - 1 minute, Immediate - aggregation, 15 minutes, 30 minutes, or 60 minutes). The
metric data is delivered at this interval and at the aggregation level you selected in the previous
step. The immediate selection randomizes the delivery time over a 1 minute window (Immediate
- 1 minute) or over the aggregation level window (Immediate - aggregation).
Note: The sensor delivers at a random frequency over the
selected interval in order to limit the number of concurrent
connections required on the server side.
8. If you want the batch data stream to be encrypted:
a. Click the Data Encryption switch to ON.
b. In the SNI Host Name field, enter the Server Name Indication (SNI) hostname or IP address
for the host.
9. In the APIToken field, enter the token. An API token is a cryptic string of up to 255 characters,
used to authenticate access to the HTTPS server.
10. If you want to send batch data to a second server, click the Batch 2 switch to ON, and then repeat
the steps for the second server.
11. Click Test Settings to confirm entries.
12. Click Save.
Setting Real Time Data Delivery Options
The sensor sends real-time data feeds to server applications that reside in a store or at a site providing
real-time dashboard capabilities for analysis or presentation purposes. For the occupancy feature, real
time data delivery must be enabled on the metric server sensor and all related sensors.
Note: Data is not buffered, therefore, retransmission of lost data
packets is not supported.
To Next Page
Loading...
