Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
57
Note: Path linking is not supported on sensors that use a
DHCPserver for their IPaddresses.
7. If your network does not use DHCP, click the switch to OFF and enter the following information:
n Sensor IPAddress
n Network Mask
n Default Gateway
n DNSServer
8. Click Save.
Setting the Web Server Information
The sensor runs a web server to display the web pages. Web server settings include the ability to set
password protection for three classes of user that access the sensor and the ability to upload TSL/SSL
security certificates.
Server Configuration
Web server settings also include the ability to upload a PEM certificate and PEM key for TLS/SSL
security. This allows users the flexibility to create and manage their own certificates and to update
certificates that expire.
Certificates must be in PEM format. The file names must be cert.pem and key.pem.
Uploading certificate files is optional. FLIRprovides a default set of files on the sensor. If there are no
user-uploaded files, or if the uploaded files are incorrectly formatted or incompatible with each other,
the sensor reverts to the default set of files.
Upgrading or downgrading the firmware version retains the user's uploaded files. Once uploaded, files
can only be overwritten; they cannot be removed.
A user must be an administrator to be able to upload certificate files.
User Management
The sensor supports three distinct users with different levels of access.
An Administrator user is for setup operations and has access to all pages of the web interface and all
features on the sensor.
An Operator user is for daily functions and maintenance of the sensor and has access to:
n Home page
n System—Histograms
n System—Reboot
n Calibration
n All zone pages
n Data Delivery—AVI capture
n Employee Filtering
To Next Page
Loading...
