Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
82
Note: The choice of Delivery Schedule is the smallest
increment for viewing the data stream of Traffic Maps in
the Device Manager’s Floorplan Editor, and also in the
Traffic Map web tool.
7. To encrypt the data:
a. Click the Data Encryption switch to ON.
b. In the SNI Host Name field, enter the host name to use a SSL Virtual Host and Server
Name Identification for the encrypted data.
Note: This field is only accessible if data encryption is
enabled.
8. In the APIToken field, enter the token. An API token is a cryptic string of up to 255 characters,
used to authenticate access to the HTTPS server.
9. Click Test Settings to confirm entries.
10. Click Save. A confirmation message appears.
Setting Available Sensor Data Options
The sensor can create on-demand data delivery requests for a specific range of dates and times in a
designated format for sensors that have at least one data delivery method configured. See Setting Data
Delivery Options for details.
Note: The amount of days and data that can be retrieved is based
on the amount of activity tracked and the number of zones set on
the sensor. The average amount of days that can be retrieved is
50 days. Contact your technical support representative PCT-
Support@flir.com for information on projecting the actual
number of days of data possible in a specific scenario.
1. Open the web interface and then click DataDelivery> Send Now.
2. From the Delivery Method drop-down, select a format for data delivery. The options depend on
which data delivery options are enabled on the Data Delivery page:
n Email
n FTP
n Batch 1
n Batch 2
To Next Page
Loading...
