FLIR BRICKSTREAM 3D Gen 2 - Setting Track Data Delivery Options

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
83
3. In the Start Date field, enter the date to begin retrieving metric data.
4. In the Start Time field, enter the time to begin retrieving metric data.
5. In the End Date field, enter the date to stop retrieving metric data.
6. In the End Time field, enter the time to stop retrieving metric data.
7. Click Send Data Now to submit this request
A confirmation message appears.
Setting Track Data Delivery Options
The sensor can send track data feeds to server applications that reside in a store or at a site. Track data
is collected for a configurable length of time (default is 5 seconds) and includes the coordinates of every
object tracked relative to the sensor.
Note: For details about track data including the data schema and
format, see the Track Data Technical Note.
1. Open the web interface to the Data Delivery> Track Data page.
2. Click the Track Data switch to ON.
The fields become active.
3. In the IPor Host Name field, enter the IP address of the server to receive data feeds from the
sensor.
4. In the Port Number field, enter the port number to which the sensor should attempt to deliver
data feeds.