Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
48
Step 6 of 10—HTTPProxy
The sensor supports using an HTTP proxy server for network access.
1. Click the Enabled switch to ON. The fields become active.
2. In the IP or Host Name field, enter the IP address or host name for the proxy server.
3. In the Port Number field, enter the port number to be used for accessing the proxy server.
4. By default, FTP traffic is included with traffic routed through the proxy. If you want to exclude
both AVI and data delivery via FTP from using the proxy server, click the Include FTP switch to
OFF to disable it.
5. Enter the username and password.
6. To confirm that the settings are correct, click Test Settings.
7. Click Save &Next.
Note: This information is also on the Settings->Basic Settings
page, HTTPProxy tab.
To Next Page
Loading...
