FLIR BRICKSTREAM 3D Gen 2 - Navigation; Functions of the Web Interface Buttons

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
37
Navigation
The web interface consists of the following menu options with supporting submenus.
Menu Item Uses
Home
Provides access to video and data streams, an overview information about the sensor,
and links to edit counting, queuing, service, and detection zones
System
Importing and exporting sensor configurations, and licensing, upgrading, and remotely
rebooting the sensor, accessible from the System submenu items
Calibration
Setting the height detection and filter parameters to achieve optimal tracking and
performance levels from the sensor
Zones
Setting up counting, queuing, service, and detection zones, as well as configuring path
linking, and zone parameters that the sensor uses to monitor activity and service metrics,
accessible from the Zones submenu items
Data
Delivery
Configuring delivery settings for batch data, email, FTP, real time data, traffic (flow) maps,
alerts, digital I/O, and AVI capture intervals, as well as accessing instant retrieval of data
to send immediately, accessible from the Data Delivery submenu items
Settings
Establishing network connectivity, time synchronization, Device Manager connectivity,
configuration of tracks, destinations for logs, password protection, and privacy options,
accessible from the Settings submenu items
Information
(top right
icon)
Accessing logs and diagnostic information about the sensor
Functions of the Web Interface Buttons
The web interface offers the following methods to store changes to the sensor’s configuration file.
Button Description
Save
Uses the permanent, non-volatile memory (Flash) of the sensor to store the effects of a
change. Saved values are applied and become the new reset values for the Reset button.
Reset Restores the previewed or changed values back to the last saved values.
Defaults Restores the current values back to the factory defaults. The values are not permanently saved
until you click the Save button.