Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
27
Warning! Measurements and other assumptions from the
site survey should always be validated when installer
arrives on site for installation if a site survey has been
bypassed.
Verify Site Accessibility
1. Identify the lift equipment needed for the installation.
2. Identify the path for necessary equipment to get into the building and perform the installation.
3. Verify if there are any restrictions on when equipment can be brought into the environment.
4. Take the following into consideration for coverage area of sensors placed at doorways, referring
to door inspection considerations:
n Door width — Wider doorways may require more than one sensor.
n Door type — Sliding doors, single or double doors, and the direction the door swings
affect sensor placement.
n Distance between doors — Can one sensor cover multiple doors, or are multiple sensors
required to ensure adequate coverage?
n Traffic corral points, such as anti-theft pedestals and displays can affect the desired
coverage area.
n Ideally, elongate the coverage area over the length of the common path as people walk
through the door.
To Next Page
Loading...
