Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
49
Step 7 of 10—Calibration (Part 1)
To begin the calibration process, answer three questions. The answers help set parameters to
appropriate values for your installation and application.
1. What analytics are going to be used?
n Counting
n Queuing/Service. Select this option if configuring queue or service analytics (with or
without counting)
2. Is the camera installed indoors?
3. Do you want to calibrate the camera?
n If you select No, the wizard skips step 8.
4. Click Save &Next.
To Next Page
Loading...
