Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
67
Setting Data Delivery Options
The sensor supports the following data delivery options:
n Setting Batch Data Streaming Options
n Setting Real Time Data Delivery Options
n Setting Alert Delivery Options
n Setting Email Delivery Options
n Setting FTP Delivery Options
n Setting Traffic Map Delivery
Metric data is buffered in on-board memory for up to 200 days, following these rules:
n Aggregation level has no effect on the 200-day limit.
n Oldest data is always overwritten first.
n Power loss does not flush the metric buffer.
Delivery Mechanism Delivery Policy
Batch Data Streaming Server acknowledgment required
Real Time Data Streaming (HTTP) Server acknowledgment required
Real Time Data Streaming (VLI) No server acknowledgment required
Alert Delivery Data Streaming No server acknowledgment required
Email Delivery No retry policy
FTP Delivery Configurable retry policy
Setting Batch Data Streaming Options
The sensor can deliver batch data to up to two servers. Set the batch data delivery options as follows.
1. Open the web interface to the Data Delivery> Batch page.
2. Click the Batch 1 switch to ON.
To Next Page
Loading...
