FLIR BRICKSTREAM 3D Gen 2

To Next Page

To Previous Page

Brickstream® 3D Gen 2 Version 6.2

6/25/2021

Imaging Solutions Inc.

Brickstream® 3D Gen 2 Installation Guide

June 2021

1. Open the web interface to the Data Delivery> Real Time page.

2. Click the Real Time Delivery 1 switch to ON.

The fields become active.

3. In the IPor Host Name field, enter the IP address of the server to receive data feeds from the

sensor.

4. In the Port number field, enter the port number to which the sensor should attempt to deliver data

feeds.

5. If the sensor needs to send data feeds to a specific URL address in the HTTP POST, in the

Destination URL/directory field enter the URL address.

Note: Use ‘/’ if you have not been directed to change this

field. This allows your IT department to use the same port

for multiple sensors and filter the traffic by the URL in the

HTTP POST.

6. From the Delivery Protocol drop-down select the desired delivery protocol.

Option Description

VLI

The XML data is sent as a raw TCP/IP data packet. The XML data is prepared with a 4

byte VLI which contains the length of the XML file to follow. The VLI interface does not

require an acknowledgment.

HTTP

The XML data is contained within an HTTP POST — the same HTTP structure as a

standard post to the server. The application must return an HTTP acknowledgment.

7. In the Delivery Frequency field, enter the number of milliseconds between connection attempts

from the sensor to the Device Manager Server.

FLIR BRICKSTREAM 3D Gen 2 - Page 70