Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
32
Qualifying Position
Considerations
Entrance
Position sensors directly over proposed counting line locations to maximize
opportunity for acquisition. This is more important in lower ceilings where
coverage is limited. When coverage is not an issue, ensure sensor is mounted
over 1m from walls and moving doors for optimal performance.
Ceiling height affecting coverage area
Wide doorway
Use two sensors side-by-side to cover the wide doorway. Contiguous coverage
between the sensors is necessary to eliminate gaps.
Wide doorway coverage
When possible, avoid positioning sensors 1m or less from the door edge (in mall-
type stores) – use more overlap instead.
Optimal position for edge location
To Next Page
Loading...
