FLIR BRICKSTREAM 3D Gen 2 - Page 4

Brickstream® 3D Gen 2 Version 6.2
6/25/2021
©2016-2021 FLIR Integrated
Imaging Solutions Inc.
All rights reserved.
Brickstream® 3D Gen 2 Installation Guide
June 2021
4
Functions of the Web Interface Buttons 37
Preconfiguration Process 38
Setting the Network IP Address 38
Connecting to the Sensor using Default Settings 38
Using the Configuration Wizard 42
Step 1 of 10—Identification 42
Step 2 of 10—Date and Time 43
Step 3 of 10—User Management 45
Step 4 of 10—Privacy Settings 46
Step 5 of 10—Device Manager 47
Step 6 of 10—HTTPProxy 48
Step 7 of 10—Calibration (Part 1) 49
Step 8 of 10—Calibration (Part 2) 50
Step 9 of 10—Data Delivery 51
Step 10 of 10—Networking 53
Configuring the Basic Settings 54
Setting up a LAN or Wi-Fi Connection 54
Using a LAN 55
Using Wi-Fi 56
Setting the Web Server Information 57
Server Configuration 57
User Management 57
Setting the Date and Time 61
Automatic Time Synchronization 61
Manual Time Setup 63
Setting the Delivery Address for Logging 63
Setting the Device Manager Server 64
Configuring Proxy Settings 65
Defining the Device Identification 65
Setting Data Delivery Options 67
Setting Batch Data Streaming Options 67
Setting Real Time Data Delivery Options 69
Setting Alert Delivery Options 71
Setting Email Delivery Options 72
Setting FTP Delivery Options 75