Fluke DTX Series - Page 244

DTX Series CableAnalyzer
Technical Reference Handbook
2
—C—
Cable ID Source, 1-28
cable IDs, 1-28
$, 1-29
auto increment, 2-20
downloaded from a PC, 1-29
sequential, 2-21
templates, 2-24
troubleshooting, 2-23
Cable Type, 3-3
fiber types tested, 9-28
twisted pair types tested, 9-15
calibration, 9-2
campus template, 2-25
cautions, 1-6, 5-2, 9-1
certifications, 9-32
channel test connections, 3-8
characteristic impedance
diagnosing failures, 4-7
specifications, 9-26
twisted pair test, 3-15
cleaning
display and case, 9-5
fiber connectors, 5-5, 9-7
Company, 2-2
compliance, 9-32
connections
alternate, B-8
channel, 3-8
fiber. See Smart Remote,
Loopback, or Far End Source
mode
permanent link, 3-7
Connector Type, 5-10
connectors
fiber module, 5-3
main tester, 1-11
optical connector maintenance,
5-5, 9-7
RJ11 (telephone), 1-7
smart remote, 1-13
crossed pairs, 3-14
crossed wires, 4-3
customer support
contacting Fluke Networks, 1-2
if something seems wrong, 9-7
—D—
Date, 1-24
decimal separator, 1-24
delay skew
diagnosing failures, 4-8
specifications, 9-17
test, 3-17
deleting
folders, 8-5
results, 8-7
diagnosing test failures
fiber, 7-2
twisted pair, 4-2
diagnostics, 3-11
display
backlight, 1-9
backlight timer, 1-25
cleaning, 9-5
contrast, 1-24
specifications, 9-34
—E—
ELFEXT
diagnosing failures, 4-4
specifications, 9-18
test, 3-26
EMC, 9-32
equipment
Far End Source mode, 5-31
FindFiber in Loopback mode, 5-44
FindFiber in Smart Remote mode,
5-41
Loopback mode, 5-23
power meter, 5-46
Smart Remote mode, 5-15