FOR-A MFR-3000 User Manual

136
9-1. Tuning the Text Color on Remote Unit Buttons
MFR-18RU/39RU/16RUTA/39RUA/18RUA units allow you to adjust the color of NAME
DISPLAY and LCD.
9-1-1. MFR-18RU/39RU Color Tuning Procedure
Ex) MFR-18RU
(1) Press and hold CONTROL, then press the SETUP button for more than 5 seconds. All
NAME DISPLAY text will turn to white.
(2) Press a button to be adjusted.
(3) The TARGET will appear and blink above the button and RED, GREEN, BLUE, ADJUST
and EXEC are also displayed.
(4) To set RED, GREEN or BLUE to ON, turn the control knob to select RED, GREEN or
BLUE, then press the control knob to turn it to ON.
(5) Press the control knob to select ADJUST, then turn the control knob to adjust the selected
color component(s) (RED, GREEN and/or BLUE).
(6) After the button color adjustment is complete, press the control knob to move to EXEC.
Turn the control knob to select YES, then press the control knob to execute the setting.
(7) The TARGET will blink above the button.
Pressing another button allows you to apply the set color to the button. The COPY will appear
above the button.
(8) After applying the color to all buttons, press SETUP to complete the color adjustment.
GREEN
OFF
TARGET
RED
OFF
ADJUST
0
POWER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
BLUE
OFF
EXEC
NO
(3)
POWER
BUSY SETUP
LOCK RESET
MFR-18RU
REMOTE CONTROL UNIT
(1)
(2)

FOR-A MFR-3000 Specifications

General

Brand	FOR-A
Model	MFR-3000
Category	Switch
Language	English