FOR-A MFR-3000 User Manual

139
MFR-16AAI
Analog Audio Input Card with A/D converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, 600 ohm or highimpedance
- Sampling frequency: 48kHz
MFR-16AAIEX
Analog Audio Input Card with A/D converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, 600 ohm or high impedance
- Sampling frequency: 48kHz
MFR-16AESI
AES/EBU Audio Input Card (Max. 8 cards)
- BNC x 16 (16 stereo pairs, 32 channels)
- 75 ohm, BNC
Audio Output
MFR-16AAOEX
Analog Audio Output Card with D/A converter (Max. 4 cards)
- 25-pin D-sub (female) x 4 (16 stereo pairs, 32 channels)
- Balanced or unbalanced, less than 100Ω, 48kHz
- Sampling frequency: 48kHz
MFR-16ADAO
Embedded/AES/Analog Audio Output Card (Max. 8 cards)
AES/EBU (Synchronous only)
- BNC x 8 (8 stereo pairs. 16 channels)
- 48 kHz
Embedded audio (1080/59.94i or 1080/60i)
- BNC x 2 (8 stereo pairs. 16 channels),
- Unbalanced, 48 kHz
Analog audio
- 25-pin D-sub (female) x 1 (4 stereo pairs. 8 channels),
- Balanced or unbalanced, less than 100Ω, 48 kHz
MFR-16AESO
AES/EBU Audio Output Card (Max. 8 cards)
- BNC x 16 (16 stereo pairs. 32 channels)
- 75 ohm BNC
RS-422 data input/output
MFR-16DTIO
RS-422 data Input / Output Card (Max. 8 cards)
Data rate: Max. 115.2 kbps
9-pin D-sub (female) x 16
Reference Input
BB: 0.429 Vp-p (NTSC)/0.45 Vp-p (PAL) or Tri-level Sync: ±0.3 Vp-p
75Ω BNC x 2, loop-through (Terminate with 75Ω terminator, it unused.)
Interfaces
MFR-LAN
10/100/1000 Base-T, RJ-45 x 2
(For connecting up to 128 RU/GPI units.)
(Second LAN port used in redundant CPU configuration)
PC-LAN
10/100 Base-TX, RJ-45 x 2 (for PC operation)
(Second LAN port used in redundant CPU configuration)
SERIAL
RS-232C/RS-422 (Internal switch), 9-pin D-sub (male) x 1
ALARM
9-pin D-sub (female) x 1 (Input: Reset, Output: Power, Fan Alarm)
Temperature
0ºC to 40ºC
Humidity
30% to 85% (no condensation)
Power
100 VAC to 240 VAC ±10%, 50/60Hz IN x 2
Consumption
128 x 128 input/output, Dual CPU/Redundant Power Unit (Maximum
Configuration):
100 V AC to 120 V AC: 1000 VA (982 W)
200 V AC to 240 V AC: 946 VA (938 W)
Dimensions
480 (W) x 354 (H) x 402 (D) mm, EIA 8 RU
Weight
50 kg (with full options)
Consumables
Power supply unit: Replace every 5 years
Fans: P-1426, P-1429, P-1430, P-1431 Replace every 4 years

FOR-A MFR-3000 Specifications

General

Brand	FOR-A
Model	MFR-3000
Category	Switch
Language	English