Fostex DMT-8VL - Page 145

DMTSvl Owner's Manual (MMC/FEX Ust/Maintenance/Spedfications)
22 4C: nondes.mode request
The command inquiring the non destructive mode status.
When this command is received, D-80/DMT-8 ver2.0/DMT-8vzwlll reply with "32 4C
(<on/otf>h*
# Nondes.mode:
Abbreviation for "non destructive recording mode". When this mode is OK not only
1 takes " made by various sound editing or AUTO PUNCH IN/OlfT bur 'rakes 0 recorded by
simultaneous pressing of the PLAY and RECORD buttons (direct recording} wttt always be
possible to UNDO (However, tree disc memory space equivalent to the recording length
will always be required). This is same function of twitching between "undo: ALL
(Nondes.mode:on) — — Edit (Nondes.mode:off)" in the setup menu on the main unit.
22 40: move clip status request
The command inquiring the clipboard status. If there is a mow paste data on the clipboard,
D-80/DMT-8 ver2.0/DMT-8vi will reply with "32 40 (<edlt message-01 >).* If data in the
clipboard is for copy paste or there is no wild data on it, "32 40 (<edit message-14 (void
data)>)" will be replied.
22 4E: move paste status request
The command inquiring the move paste execution status.
When this command is received, I>80/DMT-8 ver2.0/DMT-8\z will reply with "32 4E
(<edit message-02><mmc ume>) 0 or "32 4E (<cdit messagt-00>).* <mmc tlme> indicates
unprocessed time until completion.
23 41: digital in channel stetus request
The command inquiring the digital In channel setup status.
When this command is received, D-80/DMT-8 ver2.0/DMT-8vz will reply with "33 41
(<channel> <channel>)."
23 42: digital out channel status request
The inquiring the digital out channel setup status.
When this command is received, D-80ZDMT-8 ver2.0/DMT-8vi will reply with "33 42
(<channel><channel>)."
23 43: program status request
The command inquiring the presently operating program number.
When this command is received, D-80/DMT-8 ver2.0/DMT-8vL will reply with "33 43
(<program>)."
23 44: click on/off status request
The command inquiring the metronome on/off status of D-80/DMT-8.
When this command is received, D-80/DMT*8 ver2.0/DMT-8vi will reply with "33 44
(<on/off>)."
23 45: level status request
The command inquiring the present output level data of the lA 8 tracks. In D-80/DMT-
8, as the level data is updated about every 40msec., inquiry in 40msec. units is effective.
When this command is received. D-80/DMT-8 vcr2.0/DMT-8vi will reply with "33 45
(<count-08x)cvel data>)."
145