Fostex DMT-8VL - Page 5

7. Setting the preroll time for
the locate operation ('PRliROLLTIME")....124
8. Selecting the synchronized signal output
from the MIDI OUT connector ("MIDI SYNC OUT"). ™ — ™ ..125
9. Setting the MTC frame rate ("FRAME RATE")....126
10. Setting MTC offset time ("MTC OFFSET")...«...-127
11. Setting recording
Enable/Disable mode ("rEc" ENABLE/DISABLE)..128
12. Setting a digital input channel CdG in")--129
13. Setting a digital output channel ("dG out")...— 131
14. Setting display resolution mode On/Off ("rESoLu/").„ ™ ,. ™ .132
15. Setting Slave mode On/OfF ("SLAVE")—...-.........-—133
16. Setting MIDI device ID <"dEVicE")---134
17. Setting the Undo function range ("Undo”)— ™ ~..—,..135
MIDI Implementation Chart . 1 36
MMC command list . 137
Inquiry Message list . 137
Fostex MIDI System Exclusive Message Format . 1 38
Maintenance . 14&
Specifica tions . 1 4 &
Block Diagram . 130
INDEX . 131
5