PostBase Vision
160
… during installation / commissioning
Delivery is incomplete /
damaged.
Do not start operating the PostBase Vision mailing
system. Contact Customer Service.
Blank display. Check whether the power cable is plugged in cor-
rectly and that PostBase Vision is turned on.
Error when establishing
a connection.
Connection to the FP infrastructure not possible
with the current connectivity settings.
Repeat the network configuration with S
ETTINGS.
You will find an overview on setting the network
parameters on page 115.
Ethernet cable (network cable) for the LAN con-
nection not connected / not connected correctly.
Check cable connections (see page 24).
Internet access of the network / router disrupted.
Contact the network administrator.
FP Infrastructure currently not accessible.
Try again later.
Error during installation
procedure.
An error message with troubleshooting information
appears.
If necessary:
• Turn off PostBase Vision (see page 37).
• Wait one minute.
• Turn PostBase Vision on again.
The installation procedure restarts.
Note
: Make sure the connection configuration is
correct.
Issue Possible cause and remedy
To Next Page
Loading...
