TD-100470.doc 10 / 32
1.3 MDB Changer
1.3.1 Debit limit
This defines the maximum amount of money the system can accept at one time when working
with an MDB device. For example if a coin changer is set for SFr. 5 and this amount is reached
or exceeded, no further coins are accepted (i.e. they are immediately ejected).
Changer coin limit 0 .. 99999
(credit to chip card possible if set for increasing value)
1.3.2 Token value
Here the value of a token is defined in the case of an MDB coin changer. Default = SFr. 005.00
Additional feature
Remaining money function:
Display
L1: remain. Money
L2: delete Yes/No
Activate function only if desired by customer.
This function is linked to the remaining money function from the coin checker. Section 2.2.
Token value 0 .. 99999
1.3.3 Multiple vend.
This function permits you to have the remaining credit paid out on the side of the coin changer
during product procurement or to get an additional product with the credit.
If Multiple vend. = No >> remaining money is paid out immediately
If Multiple vend. = Yes >> remaining money is not paid out
>> press the return-money lever or get an additional product
Default = NO
1.4 Cash CARD
1.4.1 Remove card
This setting determines whether the card has to be removed before getting the product. This
function was included to prevent a cash card from being forgotten in the card reader.
Default = NO
This concerns the following cards:
- Franke Cash Card
- Franke Free Card
- MultiVend-capable MDB devices (multiple sale)
1.4.2 Load limit
Here a limit can be set so that a Franke Cash Card does not have too high of an amount.
Default = SFr. 010.00
Cash card load limit 0 .. 99999
To Next Page
Loading...
Need help?
General
