TD-100470.doc 4 / 32
1 INSTALL MENU
Note: to access the menu the first time it is necessary to use a chip card reader
(Art. no. 10 300 939).
To access the Customer menu or Install menu proceed as follows.
Attach a chip card reader to the Inkasso3 print board on socket X7. Enter the Install menu via
install card. At menu item 12 “Key-Access” change to “yes” to enable the programming keyboard.
The chip card reader can then be removed and the setup settings can be performed.
1.1 Setup
1.1.1 Three languages are available. They are:
German >> default
English
French
The language selection is available immediately without having to restart the system.
1.1.2 serial number
This is where you enter the device number.
The serial number is the machine number with which the Inkasso3 is operated.
For example 34 90 0117.
Default = 00 00 0000
Serial number range 0 .. 99999999
1.1.3 install number
This is where you enter the project or install number of the coffee machine.
Default = 00 00 0000 (important for Adjust, Download, Cash, Free card)
Install number range 0 .. 99999999
1.1.4 Coffee machine
This is where you can define the coffee machine.
The following are available for selection:
CCI / CSI
CCI Swiss/Mambo
Franke Saphira >> Default (page 36)
Franke Flair
1.1.5 Converter
This enables Franke Saphira / Flair CCI / CSI compatibility. When the protocol converter is
switched on, the MDB protocol is automatically deactivated.
To Next Page
Loading...
Need help?
General
