4.3.4. Removing the housing cover
Removing the coffee-bean container
Release cover locks on rear panel
Fold outwards from rear panel and remove
Close both coffee-bean container locks as
far as the stop
- The sides of the coffee-bean container (R
and L) are defined as viewed from the front.
The coffee-bean containers are marked
(see circle) R = Right and L = Left to define
each of the sides. The position of the locks
(under the marking) defines the side of the
coffee-bean containers.
Release coffee-bean containers by turning
to the left (as far as the stop) and take out
Use a vacuum cleaner to remove coffee-
bean residue and ground coffee from
grinder
Unscrew the 4 screws from cup shelf and
remove