TD-100470.doc 18 / 32
Display view of an entry:
Nr.: 007 Pr00.015
Num: 01 Place: 07
The individual meanings
Nr.: 007 >> PLU no. = 7
Pr 000.15 >> Price = SFr. 0.15
Num: 01 >> Number = 1
Place: 07 >> Place no. = 7
2.7.2 Copy price
With this you can copy an entry.
Press the ENTER key.
Enter the PLU no. to copy.
The PLU no. data is listed.
Use the plus or minus key to select where to copy this PLU no. The following are available for
selection:
- empty places
- all places
Confirm with the ENTER key to copy the entries.
2.7.3 Delete PLUTab
With this you can delete the entire PLU table (all entries). You are prompted to confirm with the
ENTER key.
2.7.4 PLUTab Convert
Here you can define the entire PLU table for the protocol converter.
PLU in general:
It should be remembered that if a product is defined with PLU = 0 on the coffee machine, no
inquiry is made via the protocol and the product is free.
2.8 change PIN
Here you can change the PIN code of the Adjust card.
2.9 Exit menu
This menu item is visible only if you have entered the Customer menu with the +/- key
combination. This function must be performed in order to exit the Customer menu and return to
the normal operating mode.