Franke Flair - Power Print Board; Mode of Operation; Replacing Fuse; Replacing the Power Print Board

TD-100344.doc
53
5.2. Power print board
5.2.1. Mode of operation
The power print board supplies electrical power to all the machine electrical components.
5.2.2. Replacing fuses
Removing fuses
Remove rear panel as described in
Chap. 4.3.2.
Remove white flap
Check fuses (arrow)
5.2.3. Replacing the power print board
Removing the power print board
Remove rear panel as described in
Chap. 4.3.2.
Remove white flap
Disconnect all cable connectors
Unscrew the 2 screws (arrow)
Remove power print board
5.2.4. Technical data
Supply voltage: 230V/ (US) 120V / (JP) 100V
Fuse: 4A