TD-100470.doc 17 / 32
2.6 Addimat table
2.6.1 Log on
Here you can log on Addimat waiter keys.
When this menu item is selected, you are prompted to insert a waiter key.
1. A not yet logged on waiter key must first be inserted.
2. The display shows a number field in which you can see the waiter key number.
2.6.2 Edit
Here you can view all logged on waiters. Only the logged on waiters are listed.
A maximum of 30 waiters can be logged on.
By briefly pressing ENTER you can delete logged on waiters. Pressing and holding EXIT a
moment lets you leave the item without making a change.
2.7 PLU Table
(A maximum of 40 entries possible.)
2.7.1 Edit
At this menu item you have to define the price for each individual product.
When the menu item is selected, the following is displayed:
1. Z1: Edit
Z2: Select Product
2a. If no entry has been saved:
press plus to go to the first entry (place no. 000). Continue at 3.
2b. If there are already entries:
press plus or minus to browse the programmed entries.
Or:
Directly select the corresponding product using the product key on the machine.
3. Now enter by pressing the ENTER key.
To save the modified settings, you have to scroll through the entry until the cursor is no longer
visible. The modified settings are now saved.
To Next Page
Loading...
Need help?
General
