Franke Kaffeemaschinen AG
TD-100356.doc 20 / 32
Entry diagnosis
Before carrying out service work or commissioning the Flair, an Entry diagnosis first has to be
performed. The Entry diagnosis is a defined procedure as outlined below.
Read out data (production, statistical, service and customer data).
Save the latest factory settings.
Statistical diagnosis (statements based on the read out data).
Dynamic diagnosis.
Configuration of the entry diagnosis
Select “Configuration of the entry diagnosis” in the “Execute individual test” menu.
The following window appears.
After you have selected the Entry diagnosis, it can be started using the corresponding icon.
Short diagnosis
The following steps are performed when the short Entry diagnosis is selected:
Read out data (production, statistical, service and customer data) è Complete
Save the latest factory settings è Complete
Statistical diagnosis (statements based on the read out data) è Complete
The short Entry diagnosis runs automatically. You are not required to do anything. Once it is
completed, a printable status report appears.
Now the errors output to the status report can be remedied. In the case of a new assembly, you
can begin right away with the Exit diagnosis.
To Next Page
Loading...
Need help?
General
