TD-100470.doc 14 / 32
2 CUSTOMER MENU
2.1 Free Vend
2.1.1 Free Vend
This function makes it possible to toggle settlement no and yes and permit free procurement.
2.1.2 Counter on/off
This function toggles the counter functions of the free procurement ON and OFF.
The default value is OFF.
2.2 Productcounter
This is where the number of each procured product is counted.
The following is shown in the display:
Ar: 00x A: x
P: 0.000
This means:
Ar: 00x >> Article number x
A x >> Number x products
P 15.40 >> Price of all products 15.40
The price is the sum of what the customer actually paid. It makes no difference which system
was used.
These counters are always in operation unless payment is with a Free Card and the menu item
“Free Vend – Counter on/off” is set to off.
2.3 Turnover coun.
2.3.1 Turnover total
This neither counts free procurements nor Free Card sales. Briefly pressing ENTER resets the
counter to zero. Pressing and holding EXIT a moment lets you leave the item without making
changes.
- Delete counter with ENTER
2.3.2 Cashcard
With "Cashcard" the number of procured products is sequentially totalled across all cards. The
overall sales are also totalled. Briefly pressing ENTER resets the counter to zero. Pressing and
holding EXIT a moment lets you leave the item without making changes.
- Delete counter with ENTER
2.3.3 Free Vend
With "Free Vend" the procured products are sequentially totalled if the function Counter = ON is
selected. The overall sales are not totalled. Briefly pressing ENTER resets the counter to zero.
Pressing and holding EXIT a moment lets you leave the item without making changes.
- Delete counter with ENTER
To Next Page
Loading...
Need help?
General
