Franke Flair Service Manual

TD-100342.doc
12
3.1.3. Assembly instructions
• Make sure the control unit (3) is installed with the housing at the top!
• Make sure the hose is installed without tensile load!
• To protect the machine against scaling, use a de-scaling filter if the water hardness is
above 10° dKH!
3.1.4. Assembly
Securing the electronic unit
Suspend into rear panel (cut-out) of water-
tank housing
Connecting the PTFE pipeline
From electronic unit (1)
plug into plug-in connection (d) of control
unit (3)
as far as the stop
Connecting the water
Make sure water valve(b) on control
unit (3) is off; shut it off if necessary
Connect water connection (a) to water
mains with housing of control unit (3) at
the top
Connecting the cable
From electronic unit (1) connect with
connector (e) of control unit (3)
e
d
c
b
a

Franke Flair Specifications

General

Type	Espresso Machine
Pump Pressure	15 bar
Product Type	Coffee Maker
Brand	Franke
Model	Flair
Voltage	220-240 V
Frequency	50-60 Hz
Material	Stainless Steel
Programmable	Yes
Auto Shut-off	Yes
Filter Type	Metal Filter
Coffee Output	Single or Double Espresso