Franke Flair - Deinstalling Terminal3000; Troubleshooting; Switching on the Printer

TD-100345.doc
60
6.2.4. De-installing Terminal3000
- You can leave the current program with <<ESC>>.
- Press the ON/OFF button to switch off the Terminal3000.
- Remove the serial cable between the coffee machine and the Terminal3000.
- Disconnect the plug from the socket and replace all parts in the Terminal3000 service
suitcase.
6.2.5. Troubleshooting
• Please check all your connections and cables.
• Please check your power supply.
• Switch off your coffee machine at the main switch. Please wait 10 seconds and
switch on your coffee machine again.
6.2.6. Switching on the printer
If ê lights up green,
the printer is ready.
If ¡ lights up red, the
printer is connected to
power.