Franke Flair Service Manual

Franke Kaffeemaschinen AG
TD-100356.doc 22 / 32
Exit diagnosis
The Exit diagnosis has the same procedure as the complete Entry diagnosis. The procedure
follows the scheme below.
The customer data from the Entry diagnosis is saved in the machine (production, statistical,
service and customer data).
Dynamic diagnosis.
Enter service stamp via the entry mask.
The Exit diagnosis can be ended only if no errors have occurred.
Once you have started the Exit diagnosis, follow the instructions below. You will be prompted to
do certain things on the Flair. Should an error message appear, repeat the test to ensure that
the test has been properly carried out. If you continue with the test despite an error message,
the service stamp entry cannot be made and thus no diagnosis document can be created.

Franke Flair Specifications

General

Type	Espresso Machine
Pump Pressure	15 bar
Product Type	Coffee Maker
Brand	Franke
Model	Flair
Voltage	220-240 V
Frequency	50-60 Hz
Material	Stainless Steel
Programmable	Yes
Auto Shut-off	Yes
Filter Type	Metal Filter
Coffee Output	Single or Double Espresso