Franke Flair - Interference Eliminator; Mode of Operation; Replacing the Interference Eliminator; Technical Data

TD-100344.doc
55
5.4. Interference eliminator
5.4.1. Mode of operation
The interference eliminator reduces electrical interference (interference frequencies).
5.4.2. Replacing the Interference eliminator
Removing the Interference eliminator (arrow)
Remove power cable carrier as
described in Chap. 5.3.
Disconnect all cable connectors
Press the 2 holders down on base
element
Lift up Interference eliminator and
remove
5.4.3. Technical data
Supply voltage: 250V /16A