29
EN
The favourites button
Assigning the Fa-
vourites button
The Favourites button can be assigned a parameter from the following Setup menus:
This parameter can then be called up and changed directly on the control panel.
Select the desired parameter in the Setup menu
More information about the Setup menu can be found from page 79 onwards
To assign the selected parameter to the Favourites button, press the Favourites but-
ton for approx. 5 seconds
A confirmation message is displayed.
Press the adjusting dial to confirm
The selected parameter is now assigned to the Favourites button.
IMPORTANT! Saving a favourite overwrites the previously saved favourite without warn-
ing.
Retrieving favour-
ites
Press the Favourites button briefly
The assigned parameter is displayed:
The retrieved parameter can be changed by turning the adjusting dial (blue background).
The new value takes effect immediately.
Press and turn the adjusting dial to choose from the available welding parameters.
1
2
3
1
xxxx
**
xxx xxx
To Next Page
Loading...
Need help?
General
