Fronius MagicWave 190 - Welding Parameters for Manual Metal Arc Welding

69
EN
Welding parame-
ters for manual
metal arc welding
* Depending on the selected current type, (+), (-) or the alternating current symbol is
displayed here.
xxA = actual current value depending on the specified main current
Starting current
Starting current: starting current < main current
("SoftStart")
Starting current: starting current = main current
Starting current: starting current > main current ("Hot-
Start")
Setting range: 0 - 200% (of main current)
Factory setting: 150%
**
50%
xxA
**
100%
xxA
**
150%
xxA