Fronius MagicWave 190 - Welding Parameters for MMA Welding with Cellulose Electrodes

71
EN
Polarity
Polarity, set to DC- Polarity, set to DC+
Polarity, set to AC
Setting range: DC- / DC+ / AC
Factory setting: DC-
Welding parame-
ters for MMA
welding with cel-
lulose electrodes
* Depending on the selected current type, (+) or (-) is displayed here.
xxA = actual current value depending on the specified main current
Starting current
Starting current: starting current < main current
("SoftStart")
Starting current: starting current = main current
Starting current: starting current > main current ("Hot-
Start")
DC-
+
-
DC+
+
-
AC
**
50%
xxA
**
100%
xxA
**
150%
xxA