2 Select the drive that is to be registered as the Dedicated Hot Spare and click [Assign Dedicated HS] in
[Action].
The [Assign Dedicated Hot Spare] screen appears.
3 Select the RAID group for the drive that was selected in Step 2 as the Dedicated Hot Spare. Click the
[Assign] button.
A confirmation screen appears.
4 Click the [OK] button.
The Dedicated Hot Spare is registered and the registration completion screen appears.
5 Click the [Done] button.
The screen returns to the [Drives] screen.
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using Standard Volumes
116 Configuration Guide (Basic)
To Next Page
Loading...
