(3) Enter the community name, set the required items, and click the [OK] button.
The screen returns to the community list of the [Setup SNMP Agent Community] screen.
(4) Check the community name that was set in Step (3) is added in the community list and click
the [Set] button.
A confirmation screen appears.
(5) Click the [OK] button.
The SNMP community settings are applied.
(6) Check the setting completion message and click the [Done] button.
The screen returns to the [Network] screen.
n User setup
(1) Click [Setup SNMP User] in [Action].
The [Setup SNMP Agent User] screen appears.
(2) In the user list of the [Setup SNMP Agent User] screen, click the [Add] button.
8. Monitoring Settings
Various Notification Settings
164 Configuration Guide (Basic)
To Next Page
Loading...
