GE Hydran 201i - Page 61

Page 61
Hydran* 201i Instruction Manual
MA-033 Rev. 14.0, 12-Nov-18
5.2.5.3 First Power Up (After Reconnection of Battery)
In this sequence, the H201Ti requests the values listed in Table 5-3 below before
executing the self-test sequence. The Main Display mode is then displayed (the H201Ti
will not be in service until these values are entered).
Display
Data Entry
Action
Enter Date & Time
Is Press Enter
Start the dialog
Year
(Year)
Month
(Month)
Day
(Day)
Hour
(Hour)
Minute
(Minute)
PowerStst. ID
a
0
Absolutely enter a number (1 to
9999)
H201Ti ID
a
Absolutely enter a number (1 to 254)
Table 5-3: Values Requested during the First Power up Sequence
a: For details of these parameters, see Section 5.5.6.6.
Note: The dialog of the first power-up can only be performed using the H201Ti’s keypad,
not the Hydran Host software.