GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card LOTO A001 - Lock-Out / Tag-Out (LOTO) Procedures
Page no. 383
JC-LOTO-A-001.fm
neer.
• If there exists a connection between the socket on the Mains Distribution Panel and the entrance
into the Generator, then secure the yellow box with a multihasp in conjunction with a red LOTO
padlock and LOTO red tag for each Field Engineer.
2. Write the date and Field Engineer name on each of the red labels.
3. Apply reasonable (not excessive) force to perform a "TRY-OUT". Make sure that the LOTO device
does not allow you to switch on the power at the Mains Distribution Panel .
To Next Page
Loading...
Need help?
General
