GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card PHY A006 - Regulatory and Safety Labelling
Page no. 413 Chapter 6
JC-PHY-A-006.fm
6-2 Surface Hygiene Label (for US Only)
1. If your installation is in the USA, locate the surface hygiene label, like that shown here.
2. Peel off the self-adhesive backing from the label, and affix the label in the center of the upper part of
the X-ray Console, as shown below.
Affix label here
To Next Page
Loading...
