Chapter 7 Page no. 614
JC-ELE-A-020.fm
GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A020 - Declare and Set Printers (Filming Devices)
7-4-2 Fuji FMDPL DICOM printers
• DICOM printer label: Any name you wish to see appearing on the Film Composer e.g., Fuji FMDPL.
• Hostname: Use printer Hostname if any, or a name unique to your Network e.g., Fuji1FMDPL.
• Network address: A unique IP address given by the hospital Network Administrator, e.g.,
3.48.16.135.
• Application Entity Title (AET):Must be FMDPLFINE
• Port number: Must be 104
• Layouts: Must be 1 x 1 , 1 x 2 , 2 x 1 , or 2 x 2
• Film size: Must be 8 in x 10 in W = 3907 H = 4931
11 in x 14 in W = 5075 H = 7199
• Pixel size 50
• Configuration information:Must be 1
• Density: Must be Min : 20 Max : 300
• Magnification type: Must be Cubic
• Smoothing factor: Must not contain any value
• Trim: Must be NO
• Printer Memory Size 200
To Next Page
Loading...
