To Next Page

To Previous Page

Chapter 7 Page no. 616

JC-ELE-A-020.fm

GE Healthcare Senographe DS

Revision 1 Service Information and Procedures Class A 2385072-16-8EN

Job Card ELE A020 - Declare and Set Printers (Filming Devices)

7-5 Sony Printers

7-5-1 SONY UP-DF750 Printer

• DICOM printer label: Any name you wish to see appearing on the Film Composer, e.g., SONY UP-

DF750.

• Hostname: Use printer Hostname if any, or a name unique to your Network, e.g., DF750.

• Network address: A unique IP address given by the hospital Network Administrator), e.g.,

3.48.16.135.

• Application Entity Title (AET): Must be UPDF750M

• Port number: Must be 104

• Layouts: Must be 1 x 1 , 1 x 2 , 2 x 1 , or 2 x 2

• Film size: Must be 8 in x 10 in W = 4736 H = 5856

10 in x 12 in W = 5952 H = 7040

• Pixel size 42.05

• Configuration information Must not contain any value

• Density Must be Min: 20 Max: 380

• Magnification type: Must be Cubic

• Smoothing factor: Must not contain any value

• Trim: Must be NO

• Printer Memory Size 20

Note:

In order for the Sony DP-DF750 to work with the GE mammography image size produced by the

Senographe system, the printer default settings must be changed during the installation. The de-

fault Frame Type value of “Caption2” must be changed to “M-Wide2” by the Sony printer techni-

cian.

GE Senographe DS User Manual

Other manuals for GE Senographe DS