144 Programming: Fundamentals, File Management
3.4 Working with the file manager
Archiving files
You can use the TNC archiving function to save files and directories in
a ZIP archive. You can open the ZIP archives externally using standard
programs.
Follow the steps outlined below for archiving:
In the right half of the screen, you mark the files and directories you
want to archive
Select the miscellaneous functions: press the MORE
FUNCTIONS soft key
To create an archive, press the ZIP soft key. The TNC
will show a window for entering the archive name
Enter the desired archive name
Confirm with the OK soft key: the TNC shows a
window for selecting the directory where you want to
store your archive
Select the desired directory and confirm with the OK
soft key
The TNC packs all the marked files and directories into the
desired ZIP archive. The TNC packs TNC-specific files
(e.g. plain-language programs) in ASCII format so that you
can open them externally with an ASCII editor, if
necessary
If your control is incorporated in your company network
and has write rights, you can store the archive directly on
a network drive.
The shortcut CTRL+Q enables you to directly archive files
that are already marked.
To Next Page
Loading...
