488 Programming: Execution of CAM Programs, Multi-axis Machining
12.2 Functions for multiple axis machining
12.2 Functions for multiple axis
machining
The TNC functions for multiple axis machining are described in this
chapter.
TNC function Description Page
PLANE Define machining in the tilted working plane Page 489
PLANE/M128 Inclined-tool machining Page 512
FUNCTION TCPM Define the behavior of the TNC when positioning the rotary axes (improvement of
M128)
Page 514
M116 Feed rate of rotary axes Page 519
M126 Shortest-path traverse of rotary axes Page 520
M94 Reduce display value of rotary axes Page 521
M114 Define the behavior of the TNC when positioning the rotary axes Page 522
M128 Define the behavior of the TNC when positioning the rotary axes Page 524
M134 Exact stop for positioning with rotary axes Page 527
M138 Selection of tilted axes Page 527
M144 Calculate machine kinematics Page 528
LN blocks Three-dimensional tool compensation Page 529
SPL blocks Spline interpolation Page 540
To Next Page
Loading...
