HEIDENHAIN iTNC 530 355
9.10 String parameters
Chain-linking string parameters
With the concatenation operator (string parameter || string
parameter) you can make a chain of two or more string parameters.
Show the soft-key row with special functions
Select the menu for defining various plain-language
functions
Select string functions
Select the STRING FORMULA function
Enter the number of the string parameter in which the
TNC is to save the concatenated string. Confirm with
the ENT key
Enter the number of the string parameter in which the
first substring is saved. Confirm with the ENT key:
The TNC displays the concatenation symbol ||
Confirm your entry with the ENT key
Enter the number of the string parameter in which the
second substring is saved. Confirm with the ENT key
Repeat the process until you have selected all the
required substrings. Conclude with the END key
Example: QS10 is to include the complete text of QS12, QS13 and
QS14
Parameter contents:
QS12: Workpiece
QS13: Status:
QS14: Scrap
QS10: Workpiece Status: Scrap
37 QS10 = QS12 || QS13 || QS14
To Next Page
Loading...
