HEIDENHAIN ITNC 530 - PWT 10;17;18 Testing Unit

568 Manual Operation and Setup
14.2 Moving the machine axes
Incremental jog positioning
With incremental jog positioning you can move a machine axis by a
preset distance.
Select the Manual Operation or El. Handwheel mode
Shift the soft-key row
Select incremental jog positioning: Switch the
INCREMENT soft key to ON
Enter the jog increment in mm, and confirm with the
ENT key
Press the machine axis direction button as often as
desired
16
X
Z
8
8
8
JOG INCREMENT =
The maximum permissible value for infeed is 10 mm.