HEIDENHAIN ITNC 530 - Page 359

HEIDENHAIN iTNC 530 359
9.10 String parameters
You can use the following formats to display the date:
 00: DD.MM.YYYY hh:mm:ss
 01: D.MM.YYYY h:mm:ss
 02: D.MM.YYYY h:mm
 03: D.MM.YY h:mm
 04: YYYY-MM-DD- hh:mm:ss
 05: YYYY-MM-DD hh:mm
 06: YYYY-MM-DD h:mm
 07: YY-MM-DD h:mm
 08: DD.MM.YYYY
 09: D.MM.YYYY
 10: D.MM.YY
 11: YYYY-MM-DD
 12: YY-MM-DD
 13: hh:mm:ss
 14: h:mm:ss
 15: h:mm
Example: Read out the current system time in the format
DD.MM.YYYY hh:mm:ss, and save it in parameter QS13.
37 QS13 = SYSSTR ( ID321 NR0)