HEIDENHAIN ITNC 530 - Page 675

HEIDENHAIN iTNC 530 675
17.6 Ethernet interface
 Select the Ping/Routing tab to enter the ping and routing settings:
 Select the NFS UID/GID tab to enter the user and group
identifications:
 Select the DHCP server tab to configure the DHCP server settings of
the machine network:
Setting Meaning
Ping In the Address: field, enter the IP number for
which you want to check the network
connection. Input: Four numerical values
separated by periods, e.g. 160.1.180.20. As an
alternative, you can enter the name of the
computer whose connection you want to check
 Press the Start button to begin the test. The
TNC shows the status information in the Ping
field
 Press the Stop button to conclude the test
Routing For network specialists: Status information of
the operating system for the current routing
 Update button:
Update routing
Setting Meaning
Set UID/GID
for NFS shares
 User ID:
Definition of which user identification the end
user uses to access files in the network. Ask
your network specialist for the proper value
 Group ID:
Definition of the group identification with
which you access files in the network. Ask
your network specialist for the proper value
The configuration of the DHCP server is protected by
password. Please contact the machine tool builder.